DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH
 

/usr/gnu/man2/cat.n/format.n.Z(/usr/gnu/man2/cat.n/format.n.Z)




______________________________________________________________________________


NAME

       format - Format a string in the style of sprintf


SYNOPSIS

       format formatString ?arg arg ...?
_________________________________________________________________


INTRODUCTION

       This command generates a formatted string in the same way as the ANSI C
       sprintf procedure (it uses sprintf  in  its  implementation).   Format-
       String  indicates  how  to format the result, using % conversion speci-
       fiers as in sprintf, and the additional arguments, if any, provide val-
       ues to be substituted into the result.  The return value from format is
       the formatted string.


DETAILS ON FORMATTING

       The command operates by scanning formatString from left to right.  Each
       character  from  the  format  string  is  appended to the result string
       unless it is a percent sign.  If the character is a % then  it  is  not
       copied  to  the result string.  Instead, the characters following the %
       character are treated as a conversion specifier.  The conversion speci-
       fier controls the conversion of the next successive arg to a particular
       format and the result is appended to the result string in place of  the
       conversion  specifier.   If there are multiple conversion specifiers in
       the format string, then each one controls the conversion of  one  addi-
       tional  arg.   The format command must be given enough args to meet the
       needs of all of the conversion specifiers in formatString.

       Each conversion specifier may contain up to  six  different  parts:  an
       XPG3  position specifier, a set of flags, a minimum field width, a pre-
       cision, a length modifier, and a conversion character.   Any  of  these
       fields  may be omitted except for the conversion character.  The fields
       that are present must appear in the order given above.  The  paragraphs
       below discuss each of these fields in turn.

       If  the % is followed by a decimal number and a $, as in ``%2$d'', then
       the value to convert is not taken from the  next  sequential  argument.
       Instead, it is taken from the argument indicated by the number, where 1
       corresponds to the first arg.  If  the  conversion  specifier  requires
       multiple  arguments  because of * characters in the specifier then suc-
       cessive arguments are used, starting with the  argument  given  by  the
       number.   This  follows the XPG3 conventions for positional specifiers.
       If there are any positional specifiers in formatString then all of  the
       specifiers must be positional.

       The  second  portion  of  a conversion specifier may contain any of the
       following flag characters, in any order:

       -         Specifies that the converted argument should  be  left-justi-
                 fied  in its field (numbers are normally right-justified with
                 leading spaces if needed).

       +         Specifies that a number should always be printed with a sign,
                 even if positive.

       space     Specifies  that  a  space should be added to the beginning of
                 the number if the first character isn't a sign.

       0         Specifies that the number should be padded on the  left  with
                 zeroes instead of spaces.

       #         Requests an alternate output form. For o and O conversions it
                 guarantees that the first digit is always 0.  For x or X con-
                 versions, 0x or 0X (respectively) will be added to the begin-
                 ning of the result unless it is zero.  For all floating-point
                 conversions (e, E, f, g, and G) it guarantees that the result
                 always has a decimal point.  For g and G conversions it spec-
                 ifies that trailing zeroes should not be removed.

       The  third portion of a conversion specifier is a number giving a mini-
       mum field width for this conversion.  It is typically used to make col-
       umns  line up in tabular printouts.  If the converted argument contains
       fewer characters than the minimum field width then it will be padded so
       that it is as wide as the minimum field width.  Padding normally occurs
       by adding extra spaces on the left of the converted argument, but the 0
       and  -  flags may be used to specify padding with zeroes on the left or
       with spaces on the right, respectively.  If the minimum field width  is
       specified as * rather than a number, then the next argument to the for-
       mat command determines the minimum field width; it must  be  a  numeric
       string.

       The fourth portion of a conversion specifier is a precision, which con-
       sists of a period followed by a number.  The number is used in  differ-
       ent  ways  for  different  conversions.  For e, E, and f conversions it
       specifies the number of digits to appear to the right  of  the  decimal
       point.  For g and G conversions it specifies the total number of digits
       to appear, including those on both sides of the decimal point (however,
       trailing  zeroes  after  the decimal point will still be omitted unless
       the # flag has been specified).  For integer conversions, it  specifies
       a  minimum  number  of digits to print (leading zeroes will be added if
       necessary).  For s conversions it specifies the maximum number of char-
       acters to be printed; if the string is longer than this then the trail-
       ing characters will be dropped.  If the precision is specified  with  *
       rather  than  a  number  then  the  next argument to the format command
       determines the precision; it must be a numeric string.

       The fifth part of a conversion specifier is a  length  modifier,  which
       must  be h or l.  If it is h it specifies that the numeric value should
       be truncated to a 16-bit  value  before  converting.   This  option  is
       rarely  useful.   If it is l it specifies that the numeric value should |
       be (at least) a 64-bit value.  If neither h nor l are present,  numeric |
       values  are  interpreted  as  being  values  of the width of the native |
       machine word, as described by tcl_platform(wordSize).

       The last thing in a conversion specifier  is  an  alphabetic  character
       that determines what kind of conversion to perform.  The following con-
       version characters are currently supported:

       d         Convert integer to signed decimal string.

       u         Convert integer to unsigned decimal string.

       i         Convert integer to signed decimal string;   the  integer  may
                 either be in decimal, in octal (with a leading 0) or in hexa-
                 decimal (with a leading 0x).

       o         Convert integer to unsigned octal string.

       x or X    Convert integer to unsigned hexadecimal string, using  digits
                 ``0123456789abcdef'' for x and ``0123456789ABCDEF'' for X).   |

       c                                                                       ||
                 Convert integer to the Unicode character it represents.

       s         No conversion; just insert string.

       f         Convert floating-point number to signed decimal string of the
                 form  xx.yyy,  where  the  number of y's is determined by the
                 precision (default: 6).  If the precision is 0 then no  deci-
                 mal point is output.

       e or e    Convert  floating-point  number to scientific notation in the
                 form x.yyye+-zz, where the number of y's is determined by the
                 precision  (default: 6).  If the precision is 0 then no deci-
                 mal point is output.  If the E form is used then E is printed
                 instead of e.

       g or G    If  the  exponent is less than -4 or greater than or equal to
                 the precision, then convert floating-point number as  for  %e
                 or  %E.   Otherwise convert as for %f.  Trailing zeroes and a
                 trailing decimal point are omitted.

       %         No conversion: just insert %.

       For the numerical conversions the argument being converted must  be  an
       integer  or  floating-point  string;  format  converts  the argument to
       binary and then converts it back to a string according to  the  conver-
       sion specifier.


DIFFERENCES FROM ANSI SPRINTF

       The  behavior  of  the format command is the same as the ANSI C sprintf
       procedure except for the following differences:

       [1]    %p and %n specifiers are not currently supported.

       [2]    For %c conversions the argument must be a decimal string,  which
              will then be converted to the corresponding character value.

       [3]    The  l  modifier  is ignored for real values and on 64-bit plat- |
              forms, which are always converted as  if  the  l  modifier  were |
              present  (i.e. the types double and long are used for the inter- |
              nal representation of real and  integer  values,  respectively).
              If the h modifier is specified then integer values are truncated
              to short before conversion.  Both h and l modifiers are  ignored
              on all other conversions.


EXAMPLES

       Convert the output of time into seconds to an accuracy of hundredths of
       a second:
              set us [lindex [time $someTclCode] 0]
              puts [format "%.2f seconds to execute" [expr {$us / 1e6}]]

       Create a packed X11 literal color specification:
              # Each color-component should be in range (0..255)
              set color [format "#%02x%02x%02x" $r $g $b]

       Use XPG3 format codes to allow reordering of fields (a  technique  that
       is  often  used  in  localized  message  catalogs;  see msgcat) without
       reordering the data values passed to format:
              set fmt1 "Today, %d shares in %s were bought at $%.2f each"
              puts [format $fmt1 123 "Global BigCorp" 19.37]

              set fmt2 "Bought %2\$s equity ($%3$.2f x %1\$d) today"
              puts [format $fmt2 123 "Global BigCorp" 19.37]

       Print a small table of powers of three:
              # Set up the column widths
              set w1 5
              set w2 10

              # Make a nice header (with separator) for the table first
              set sep +-[string repeat - $w1]-+-[string repeat - $w2]-+
              puts $sep
              puts [format "| %-*s | %-*s |" $w1 "Index" $w2 "Power"]
              puts $sep

              # Print the contents of the table
              set p 1
              for {set i 0} {$i<=20} {incr i} {
                 puts [format "| %*d | %*ld |" $w1 $i $w2 $p]
                 set p [expr {wide($p) * 3}]
              }

              # Finish off by printing the separator again
              puts $sep


SEE ALSO

       scan(n), sprintf(3), string(n)


KEYWORDS

       conversion specifier, format, sprintf, string, substitution

Tcl                                   8.1                            format(n)

Man(1) output converted with man2html