/usr/man2/cat.1/ec.1.Z(/usr/man2/cat.1/ec.1.Z)

NAME

       openssl-ec, ec - EC key processing

SYNOPSIS

       openssl ec [-inform PEM|DER] [-outform PEM|DER] [-in filename] [-passin
       arg] [-out filename] [-passout arg] [-des] [-des3] [-idea] [-text]
       [-noout] [-param_out] [-pubin] [-pubout] [-conv_form arg] [-param_enc
       arg] [-engine id]

DESCRIPTION

       The ec command processes EC keys. They can be converted between various
       forms and their components printed out. Note OpenSSL uses the private
       key format specified in 'SEC 1: Elliptic Curve Cryptography'
       (http://www.secg.org/). To convert a OpenSSL EC private key into the
       PKCS#8 private key format use the pkcs8 command.

COMMAND OPTIONS

       -inform DER|PEM
           This specifies the input format. The DER option with a private key
           uses an ASN.1 DER encoded SEC1 private key. When used with a public
           key it uses the SubjectPublicKeyInfo structure as specified in RFC
           3280.  The PEM form is the default format: it consists of the DER
           format base64 encoded with additional header and footer lines. In
           the case of a private key PKCS#8 format is also accepted.

       -outform DER|PEM
           This specifies the output format, the options have the same meaning
           as the -inform option.

       -in filename
           This specifies the input filename to read a key from or standard
           input if this option is not specified. If the key is encrypted a
           pass phrase will be prompted for.

       -passin arg
           the input file password source. For more information about the for-
           mat of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -out filename
           This specifies the output filename to write a key to or standard
           output by is not specified. If any encryption options are set then
           a pass phrase will be prompted for. The output filename should not
           be the same as the input filename.

       -passout arg
           the output file password source. For more information about the
           format of arg see the PASS PHRASE ARGUMENTS section in openssl(1).

       -des|-des3|-idea
           These options encrypt the private key with the DES, triple DES,
           IDEA or any other cipher supported by OpenSSL before outputting it.
           A pass phrase is prompted for.  If none of these options is speci-
           fied the key is written in plain text. This means that using the ec
           utility to read in an encrypted key with no encryption option can
           be used to remove the pass phrase from a key, or by setting the
           encryption options it can be use to add or change the pass phrase.
           These options can only be used with PEM format output files.

       -text
           prints out the public, private key components and parameters.

       -noout
           this option prevents output of the encoded version of the key.

       -modulus
           this option prints out the value of the public key component of the
           key.

       -pubin
           by default a private key is read from the input file: with this
           option a public key is read instead.

       -pubout
           by default a private key is output. With this option a public key
           will be output instead. This option is automatically set if the
           input is a public key.

       -conv_form
           This specifies how the points on the elliptic curve are converted
           into octet strings. Possible values are: compressed (the default
           value), uncompressed and hybrid. For more information regarding the
           point conversion forms please read the X9.62 standard.  Note Due to
           patent issues the compressed option is disabled by default for
           binary curves and can be enabled by defining the preprocessor macro
           OPENSSL_EC_BIN_PT_COMP at compile time.

       -param_enc arg
           This specifies how the elliptic curve parameters are encoded.  Pos-
           sible value are: named_curve, i.e. the ec parameters are specified
           by a OID, or explicit where the ec parameters are explicitly given
           (see RFC 3279 for the definition of the EC parameters structures).
           The default value is named_curve.  Note the implicitlyCA alterna-
           tive ,as specified in RFC 3279, is currently not implemented in
           OpenSSL.

       -engine id
           specifying an engine (by its unique id string) will cause ec to
           attempt to obtain a functional reference to the specified engine,
           thus initialising it if needed. The engine will then be set as the
           default for all available algorithms.

NOTES

       The PEM private key format uses the header and footer lines:

        -----BEGIN EC PRIVATE KEY-----
        -----END EC PRIVATE KEY-----

       The PEM public key format uses the header and footer lines:

        -----BEGIN PUBLIC KEY-----
        -----END PUBLIC KEY-----

EXAMPLES

       To encrypt a private key using triple DES:

        openssl ec -in key.pem -des3 -out keyout.pem

       To convert a private key from PEM to DER format:

        openssl ec -in key.pem -outform DER -out keyout.der

       To print out the components of a private key to standard output:

        openssl ec -in key.pem -text -noout

       To just output the public part of a private key:

        openssl ec -in key.pem -pubout -out pubkey.pem

       To change the parameters encoding to explicit:

        openssl ec -in key.pem -param_enc explicit -out keyout.pem

       To change the point conversion form to compressed:

        openssl ec -in key.pem -conv_form compressed -out keyout.pem

SEE ALSO

       ecparam(1), dsa(1), rsa(1)

HISTORY

       The ec command was first introduced in OpenSSL 0.9.8.

AUTHOR

       Nils Larsch for the OpenSSL project (http://www.openssl.org).

1.0.2t                            2019-09-10                             EC(1)
See also openssl-ec(1)