|
|
perldata - Perl data types
Perl has three built-in data types: scalars, arrays of scalars, and associative arrays of scalars, known as ``hashes''. A scalar is a single string (of any size, limited only by the available memory), number, or a reference to something (which will be discussed in the perlref manpage). Normal arrays are ordered lists of scalars indexed by number, starting with 0. Hashes are unordered collections of scalar values indexed by their associated string key.
Values are usually referred to by name, or through a named reference.
The first character of the name tells you to what sort of data
structure it refers. The rest of the name tells you the particular
value to which it refers. Usually this name is a single identifier,
that is, a string beginning with a letter or underscore, and
containing letters, underscores, and digits. In some cases, it may
be a chain of identifiers, separated by :: (or by the slightly
archaic '); all but the last are interpreted as names of packages,
to locate the namespace in which to look up the final identifier
(see Packages in the perlmod manpage for details). It's possible to substitute
for a simple identifier, an expression that produces a reference
to the value at runtime. This is described in more detail below
and in the perlref manpage.
Perl also has its own built-in variables whose names don't follow
these rules. They have strange names so they don't accidentally
collide with one of your normal variables. Strings that match
parenthesized parts of a regular expression are saved under names
containing only digits after the $ (see the perlop manpage and the perlre manpage).
In addition, several special variables that provide windows into
the inner working of Perl have names containing punctuation characters
and control characters. These are documented in the perlvar manpage.
Scalar values are always named with '$', even when referring to a scalar that is part of an array or a hash. The '$' symbol works semantically like the English word ``the'' in that it indicates a single value is expected.
$days # the simple scalar value "days"
$days[28] # the 29th element of array @days
$days{'Feb'} # the 'Feb' value from hash %days
$#days # the last index of array @days
Entire arrays (and slices of arrays and hashes) are denoted by '@', which works much like the word ``these'' or ``those'' does in English, in that it indicates multiple values are expected.
@days # ($days[0], $days[1],... $days[n])
@days[3,4,5] # same as ($days[3],$days[4],$days[5])
@days{'a','c'} # same as ($days{'a'},$days{'c'})
Entire hashes are denoted by '%':
%days # (key1, val1, key2, val2 ...)
In addition, subroutines are named with an initial '&', though this is optional when unambiguous, just as the word ``do'' is often redundant in English. Symbol table entries can be named with an initial '*', but you don't really care about that yet (if ever :-).
Every variable type has its own namespace, as do several
non-variable identifiers. This means that you can, without fear
of conflict, use the same name for a scalar variable, an array, or
a hash--or, for that matter, for a filehandle, a directory handle, a
subroutine name, a format name, or a label. This means that $foo
and @foo are two different variables. It also means that $foo[1]
is a part of @foo, not a part of $foo. This may seem a bit weird,
but that's okay, because it is weird.
Because variable references always start with '$', '@', or '%', the
``reserved'' words aren't in fact reserved with respect to variable
names. They are reserved with respect to labels and filehandles,
however, which don't have an initial special character. You can't
have a filehandle named ``log'', for instance. Hint: you could say
open(LOG,'logfile') rather than open(log,'logfile'). Using
uppercase filehandles also improves readability and protects you
from conflict with future reserved words. Case is significant--``FOO'',
``Foo'', and ``foo'' are all different names. Names that start with a
letter or underscore may also contain digits and underscores.
It is possible to replace such an alphanumeric name with an expression that returns a reference to the appropriate type. For a description of this, see the perlref manpage.
Names that start with a digit may contain only more digits. Names
that do not start with a letter, underscore, digit or a caret (i.e.
a control character) are limited to one character, e.g., $% or
$$. (Most of these one character names have a predefined
significance to Perl. For instance, $$ is the current process
id.)
The interpretation of operations and values in Perl sometimes depends on the requirements of the context around the operation or value. There are two major contexts: list and scalar. Certain operations return list values in contexts wanting a list, and scalar values otherwise. If this is true of an operation it will be mentioned in the documentation for that operation. In other words, Perl overloads certain operations based on whether the expected return value is singular or plural. Some words in English work this way, like ``fish'' and ``sheep''.
In a reciprocal fashion, an operation provides either a scalar or a list context to each of its arguments. For example, if you say
int( <STDIN> )
the integer operation provides scalar context for the <> operator, which responds by reading one line from STDIN and passing it back to the integer operation, which will then find the integer value of that line and return that. If, on the other hand, you say
sort( <STDIN> )
then the sort operation provides list context for <>, which will proceed to read every line available up to the end of file, and pass that list of lines back to the sort routine, which will then sort those lines and return them as a list to whatever the context of the sort was.
Assignment is a little bit special in that it uses its left argument to determine the context for the right argument. Assignment to a scalar evaluates the right-hand side in scalar context, while assignment to an array or hash evaluates the righthand side in list context. Assignment to a list (or slice, which is just a list anyway) also evaluates the righthand side in list context.
When you use the use warnings pragma or Perl's -w command-line
option, you may see warnings
about useless uses of constants or functions in ``void context''.
Void context just means the value has been discarded, such as a
statement containing only "fred"; or getpwuid(0);. It still
counts as scalar context for functions that care whether or not
they're being called in list context.
User-defined subroutines may choose to care whether they are being called in a void, scalar, or list context. Most subroutines do not need to bother, though. That's because both scalars and lists are automatically interpolated into lists. See wantarray in the perlfunc manpage for how you would dynamically discern your function's calling context.
All data in Perl is a scalar, an array of scalars, or a hash of scalars. A scalar may contain one single value in any of three different flavors: a number, a string, or a reference. In general, conversion from one form to another is transparent. Although a scalar may not directly hold multiple values, it may contain a reference to an array or hash which in turn contains multiple values.
Scalars aren't necessarily one thing or another. There's no place to declare a scalar variable to be of type ``string'', type ``number'', type ``reference'', or anything else. Because of the automatic conversion of scalars, operations that return scalars don't need to care (and in fact, cannot care) whether their caller is looking for a string, a number, or a reference. Perl is a contextually polymorphic language whose scalars can be strings, numbers, or references (which includes objects). Although strings and numbers are considered pretty much the same thing for nearly all purposes, references are strongly-typed, uncastable pointers with builtin reference-counting and destructor invocation.
A scalar value is interpreted as TRUE in the Boolean sense if it is not the null string or the number 0 (or its string equivalent, ``0''). The Boolean context is just a special kind of scalar context where no conversion to a string or a number is ever performed.
There are actually two varieties of null strings (sometimes referred
to as ``empty'' strings), a defined one and an undefined one. The
defined version is just a string of length zero, such as "".
The undefined version is the value that indicates that there is
no real value for something, such as when there was an error, or
at end of file, or when you refer to an uninitialized variable or
element of an array or hash. Although in early versions of Perl,
an undefined scalar could become defined when first used in a
place expecting a defined value, this no longer happens except for
rare cases of autovivification as explained in the perlref manpage. You can
use the defined() operator to determine whether a scalar value is
defined (this has no meaning on arrays or hashes), and the undef()
operator to produce an undefined value.
To find out whether a given string is a valid non-zero number, it's sometimes enough to test it against both numeric 0 and also lexical ``0'' (although this will cause noises if warnings are on). That's because strings that aren't numbers count as 0, just as they do in awk:
if ($str == 0 && $str ne "0") {
warn "That doesn't look like a number";
}
That method may be best because otherwise you won't treat IEEE
notations like NaN or Infinity properly. At other times, you
might prefer to determine whether string data can be used numerically
by calling the POSIX::strtod() function or by inspecting your string
with a regular expression (as documented in the perlre manpage).
warn "has nondigits" if /\D/;
warn "not a natural number" unless /^\d+$/; # rejects -3
warn "not an integer" unless /^-?\d+$/; # rejects +3
warn "not an integer" unless /^[+-]?\d+$/;
warn "not a decimal number" unless /^-?\d+\.?\d*$/; # rejects .2
warn "not a decimal number" unless /^-?(?:\d+(?:\.\d*)?|\.\d+)$/;
warn "not a C float"
unless /^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/;
The length of an array is a scalar value. You may find the length
of array @days by evaluating $#days, as in csh. However, this
isn't the length of the array; it's the subscript of the last element,
which is a different value since there is ordinarily a 0th element.
Assigning to $#days actually changes the length of the array.
Shortening an array this way destroys intervening values. Lengthening
an array that was previously shortened does not recover values
that were in those elements. (It used to do so in Perl 4, but we
had to break this to make sure destructors were called when expected.)
You can also gain some minuscule measure of efficiency by pre-extending an array that is going to get big. You can also extend an array by assigning to an element that is off the end of the array. You can truncate an array down to nothing by assigning the null list () to it. The following are equivalent:
@whatever = ();
$#whatever = -1;
If you evaluate an array in scalar context, it returns the length of the array. (Note that this is not true of lists, which return the last value, like the C comma operator, nor of built-in functions, which return whatever they feel like returning.) The following is always true:
scalar(@whatever) == $#whatever - $[ + 1;
Version 5 of Perl changed the semantics of $[: files that don't set
the value of $[ no longer need to worry about whether another
file changed its value. (In other words, use of $[ is deprecated.)
So in general you can assume that
scalar(@whatever) == $#whatever + 1;
Some programmers choose to use an explicit conversion so as to leave nothing to doubt:
$element_count = scalar(@whatever);
If you evaluate a hash in scalar context, it returns false if the
hash is empty. If there are any key/value pairs, it returns true;
more precisely, the value returned is a string consisting of the
number of used buckets and the number of allocated buckets, separated
by a slash. This is pretty much useful only to find out whether
Perl's internal hashing algorithm is performing poorly on your data
set. For example, you stick 10,000 things in a hash, but evaluating
%HASH in scalar context reveals "1/16", which means only one out
of sixteen buckets has been touched, and presumably contains all
10,000 of your items. This isn't supposed to happen.
You can preallocate space for a hash by assigning to the keys() function.
This rounds up the allocated buckets to the next power of two:
keys(%users) = 1000; # allocate 1024 buckets
Numeric literals are specified in any of the following floating point or integer formats:
12345
12345.67
.23E-10 # a very small number
3.14_15_92 # a very important number
4_294_967_296 # underscore for legibility
0xff # hex
0xdead_beef # more hex
0377 # octal (only numbers, begins with 0)
0b011011 # binary
You are allowed to use underscores (underbars) in numeric literals between digits for legibility. You could, for example, group binary digits by threes (as for a Unix-style mode argument such as 0b110_100_100) or by fours (to represent nibbles, as in 0b1010_0110) or in other groups.
String literals are usually delimited by either single or double
quotes. They work much like quotes in the standard Unix shells:
double-quoted string literals are subject to backslash and variable
substitution; single-quoted strings are not (except for \' and
\\). The usual C-style backslash rules apply for making
characters such as newline, tab, etc., as well as some more exotic
forms. See Quote and Quote-like Operators in the perlop manpage for a list.
Hexadecimal, octal, or binary, representations in string literals
(e.g. '0xff') are not automatically converted to their integer
representation. The hex() and oct() functions make these conversions
for you. See hex in the perlfunc manpage and oct in the perlfunc manpage for more details.
You can also embed newlines directly in your strings, i.e., they can end on a different line than they begin. This is nice, but if you forget your trailing quote, the error will not be reported until Perl finds another line containing the quote character, which may be much further on in the script. Variable substitution inside strings is limited to scalar variables, arrays, and array or hash slices. (In other words, names beginning with $ or @, followed by an optional bracketed expression as a subscript.) The following code segment prints out ``The price is $100.''
$Price = '$100'; # not interpolated
print "The price is $Price.\n"; # interpolated
There is no double interpolation in Perl, so the $100 is left as is.
As in some shells, you can enclose the variable name in braces to disambiguate it from following alphanumerics (and underscores). You must also do this when interpolating a variable into a string to separate the variable name from a following double-colon or an apostrophe, since these would be otherwise treated as a package separator:
$who = "Larry";
print PASSWD "${who}::0:0:Superuser:/:/bin/perl\n";
print "We use ${who}speak when ${who}'s here.\n";
Without the braces, Perl would have looked for a $whospeak, a
$who::0, and a $who's variable. The last two would be the
$0 and the $s variables in the (presumably) non-existent package
who.
In fact, an identifier within such curlies is forced to be a string,
as is any simple identifier within a hash subscript. Neither need
quoting. Our earlier example, $days{'Feb'} can be written as
$days{Feb} and the quotes will be assumed automatically. But
anything more complicated in the subscript will be interpreted as an
expression. This means for example that $version{2.0}++ is
equivalent to $version{2}++, not to $version{'2.0'}++.
Note: Version Strings (v-strings) have been deprecated. They will not be available after Perl 5.8. The marginal benefits of v-strings were greatly outweighed by the potential for Surprise and Confusion.
A literal of the form v1.20.300.4000 is parsed as a string composed
of characters with the specified ordinals. This form, known as
v-strings, provides an alternative, more readable way to construct
strings, rather than use the somewhat less readable interpolation form
"\x{1}\x{14}\x{12c}\x{fa0}". This is useful for representing
Unicode strings, and for comparing version ``numbers'' using the string
comparison operators, cmp, gt, lt etc. If there are two or
more dots in the literal, the leading v may be omitted.
print v9786; # prints UTF-8 encoded SMILEY, "\x{263a}"
print v102.111.111; # prints "foo"
print 102.111.111; # same
Such literals are accepted by both require and use for
doing a version check. The $^V special variable also contains the
running Perl interpreter's version in this form. See $^V in the perlvar manpage.
Note that using the v-strings for IPv4 addresses is not portable unless
you also use the inet_aton()/inet_ntoa() routines of the Socket package.
Note that since Perl 5.8.1 the single-number v-strings (like v65)
are not v-strings before the => operator (which is usually used
to separate a hash key from a hash value), instead they are interpreted
as literal strings ('v65'). They were v-strings from Perl 5.6.0 to
Perl 5.8.0, but that caused more confusion and breakage than good.
Multi-number v-strings like v65.66 and 65.66.67 continue to
be v-strings always.
The special literals __FILE__, __LINE__, and __PACKAGE__
represent the current filename, line number, and package name at that
point in your program. They may be used only as separate tokens; they
will not be interpolated into strings. If there is no current package
(due to an empty package; directive), __PACKAGE__ is the undefined
value.
The two control characters ^D and ^Z, and the tokens __END__ and __DATA__ may be used to indicate the logical end of the script before the actual end of file. Any following text is ignored.
Text after __DATA__ but may be read via the filehandle PACKNAME::DATA,
where PACKNAME is the package that was current when the __DATA__
token was encountered. The filehandle is left open pointing to the
contents after __DATA__. It is the program's responsibility to
close DATA when it is done reading from it. For compatibility with
older scripts written before __DATA__ was introduced, __END__ behaves
like __DATA__ in the toplevel script (but not in files loaded with
require or do) and leaves the remaining contents of the
file accessible via main::DATA.
See the SelfLoader manpage for more description of __DATA__, and an example of its use. Note that you cannot read from the DATA filehandle in a BEGIN block: the BEGIN block is executed as soon as it is seen (during compilation), at which point the corresponding __DATA__ (or __END__) token has not yet been seen.
A word that has no other interpretation in the grammar will
be treated as if it were a quoted string. These are known as
``barewords''. As with filehandles and labels, a bareword that consists
entirely of lowercase letters risks conflict with future reserved
words, and if you use the use warnings pragma or the -w switch,
Perl will warn you about any
such words. Some people may wish to outlaw barewords entirely. If you
say
use strict 'subs';
then any bareword that would NOT be interpreted as a subroutine call
produces a compile-time error instead. The restriction lasts to the
end of the enclosing block. An inner block may countermand this
by saying no strict 'subs'.
Arrays and slices are interpolated into double-quoted strings
by joining the elements with the delimiter specified in the $"
variable ($LIST_SEPARATOR if ``use English;'' is specified),
space by default. The following are equivalent:
$temp = join($", @ARGV);
system "echo $temp";
system "echo @ARGV";
Within search patterns (which also undergo double-quotish substitution)
there is an unfortunate ambiguity: Is /$foo[bar]/ to be interpreted as
/${foo}[bar]/ (where [bar] is a character class for the regular
expression) or as /${foo[bar]}/ (where [bar] is the subscript to array
@foo)? If @foo doesn't otherwise exist, then it's obviously a
character class. If @foo exists, Perl takes a good guess about [bar],
and is almost always right. If it does guess wrong, or if you're just
plain paranoid, you can force the correct interpretation with curly
braces as above.
If you're looking for the information on how to use here-documents, which used to be here, that's been moved to Quote and Quote-like Operators in the perlop manpage.
List values are denoted by separating individual values by commas (and enclosing the list in parentheses where precedence requires it):
(LIST)
In a context not requiring a list value, the value of what appears to be a list literal is simply the value of the final element, as with the C comma operator. For example,
@foo = ('cc', '-E', $bar);
assigns the entire list value to array @foo, but
$foo = ('cc', '-E', $bar);
assigns the value of variable $bar to the scalar variable $foo. Note that the value of an actual array in scalar context is the length of the array; the following assigns the value 3 to $foo:
@foo = ('cc', '-E', $bar);
$foo = @foo; # $foo gets 3
You may have an optional comma before the closing parenthesis of a list literal, so that you can say:
@foo = (
1,
2,
3,
);
To use a here-document to assign an array, one line per element, you might use an approach like this:
@sauces = <<End_Lines =~ m/(\S.*\S)/g;
normal tomato
spicy tomato
green chile
pesto
white wine
End_Lines
LISTs do automatic interpolation of sublists. That is, when a LIST is evaluated, each element of the list is evaluated in list context, and the resulting list value is interpolated into LIST just as if each individual element were a member of LIST. Thus arrays and hashes lose their identity in a LIST--the list
(@foo,@bar,&SomeSub,%glarch)
contains all the elements of @foo followed by all the elements of @bar, followed by all the elements returned by the subroutine named SomeSub called in list context, followed by the key/value pairs of %glarch. To make a list reference that does NOT interpolate, see the perlref manpage.
The null list is represented by (). Interpolating it in a list has no effect. Thus ((),(),()) is equivalent to (). Similarly, interpolating an array with no elements is the same as if no array had been interpolated at that point.
This interpolation combines with the facts that the opening
and closing parentheses are optional (except when necessary for
precedence) and lists may end with an optional comma to mean that
multiple commas within lists are legal syntax. The list 1,,3 is a
concatenation of two lists, 1, and 3, the first of which ends
with that optional comma. 1,,3 is (1,),(3) is 1,3 (And
similarly for 1,,,3 is (1,),(,),3 is 1,3 and so on.) Not that
we'd advise you to use this obfuscation.
A list value may also be subscripted like a normal array. You must put the list in parentheses to avoid ambiguity. For example:
# Stat returns list value.
$time = (stat($file))[8];
# SYNTAX ERROR HERE.
$time = stat($file)[8]; # OOPS, FORGOT PARENTHESES
# Find a hex digit.
$hexdigit = ('a','b','c','d','e','f')[$digit-10];
# A "reverse comma operator".
return (pop(@foo),pop(@foo))[0];
Lists may be assigned to only when each element of the list is itself legal to assign to:
($a, $b, $c) = (1, 2, 3);
($map{'red'}, $map{'blue'}, $map{'green'}) = (0x00f, 0x0f0, 0xf00);
An exception to this is that you may assign to undef in a list.
This is useful for throwing away some of the return values of a
function:
($dev, $ino, undef, undef, $uid, $gid) = stat($file);
List assignment in scalar context returns the number of elements produced by the expression on the right side of the assignment:
$x = (($foo,$bar) = (3,2,1)); # set $x to 3, not 2
$x = (($foo,$bar) = f()); # set $x to f()'s return count
This is handy when you want to do a list assignment in a Boolean context, because most list functions return a null list when finished, which when assigned produces a 0, which is interpreted as FALSE.
It's also the source of a useful idiom for executing a function or performing an operation in list context and then counting the number of return values, by assigning to an empty list and then using that assignment in scalar context. For example, this code:
$count = () = $string =~ /\d+/g;
will place into $count the number of digit groups found in $string. This happens because the pattern match is in list context (since it is being assigned to the empty list), and will therefore return a list of all matching parts of the string. The list assignment in scalar context will translate that into the number of elements (here, the number of times the pattern matched) and assign that to $count. Note that simply using
$count = $string =~ /\d+/g;
would not have worked, since a pattern match in scalar context will only return true or false, rather than a count of matches.
The final element of a list assignment may be an array or a hash:
($a, $b, @rest) = split;
my($a, $b, %rest) = @_;
You can actually put an array or hash anywhere in the list, but the first one
in the list will soak up all the values, and anything after it will become
undefined. This may be useful in a my() or local().
A hash can be initialized using a literal list holding pairs of items to be interpreted as a key and a value:
# same as map assignment above
%map = ('red',0x00f,'blue',0x0f0,'green',0xf00);
While literal lists and named arrays are often interchangeable, that's not the case for hashes. Just because you can subscript a list value like a normal array does not mean that you can subscript a list value as a hash. Likewise, hashes included as parts of other lists (including parameters lists and return lists from functions) always flatten out into key/value pairs. That's why it's good to use references sometimes.
It is often more readable to use the => operator between key/value
pairs. The => operator is mostly just a more visually distinctive
synonym for a comma, but it also arranges for its left-hand operand to be
interpreted as a string -- if it's a bareword that would be a legal simple
identifier (=> doesn't quote compound identifiers, that contain
double colons). This makes it nice for initializing hashes:
%map = (
red => 0x00f,
blue => 0x0f0,
green => 0xf00,
);
or for initializing hash references to be used as records:
$rec = {
witch => 'Mable the Merciless',
cat => 'Fluffy the Ferocious',
date => '10/31/1776',
};
or for using call-by-named-parameter to complicated functions:
$field = $query->radio_group(
name => 'group_name',
values => ['eenie','meenie','minie'],
default => 'meenie',
linebreak => 'true',
labels => \%labels
);
Note that just because a hash is initialized in that order doesn't mean that it comes out in that order. See sort in the perlfunc manpage for examples of how to arrange for an output ordering.
An array is subscripted by specifying a dollar sign ($), then the
name of the array (without the leading @), then the subscript inside
square brackets. For example:
@myarray = (5, 50, 500, 5000);
print "Element Number 2 is", $myarray[2], "\n";
The array indices start with 0. A negative subscript retrieves its
value from the end. In our example, $myarray[-1] would have been
5000, and $myarray[-2] would have been 500.
Hash subscripts are similar, only instead of square brackets curly brackets are used. For example:
%scientists =
(
"Newton" => "Isaac",
"Einstein" => "Albert",
"Darwin" => "Charles",
"Feynman" => "Richard",
);
print "Darwin's First Name is ", $scientists{"Darwin"}, "\n";
A common way to access an array or a hash is one scalar element at a time. You can also subscript a list to get a single element from it.
$whoami = $ENV{"USER"}; # one element from the hash
$parent = $ISA[0]; # one element from the array
$dir = (getpwnam("daemon"))[7]; # likewise, but with list
A slice accesses several elements of a list, an array, or a hash simultaneously using a list of subscripts. It's more convenient than writing out the individual elements as a list of separate scalar values.
($him, $her) = @folks[0,-1]; # array slice
@them = @folks[0 .. 3]; # array slice
($who, $home) = @ENV{"USER", "HOME"}; # hash slice
($uid, $dir) = (getpwnam("daemon"))[2,7]; # list slice
Since you can assign to a list of variables, you can also assign to an array or hash slice.
@days[3..5] = qw/Wed Thu Fri/;
@colors{'red','blue','green'}
= (0xff0000, 0x0000ff, 0x00ff00);
@folks[0, -1] = @folks[-1, 0];
The previous assignments are exactly equivalent to
($days[3], $days[4], $days[5]) = qw/Wed Thu Fri/;
($colors{'red'}, $colors{'blue'}, $colors{'green'})
= (0xff0000, 0x0000ff, 0x00ff00);
($folks[0], $folks[-1]) = ($folks[-1], $folks[0]);
Since changing a slice changes the original array or hash that it's
slicing, a foreach construct will alter some--or even all--of the
values of the array or hash.
foreach (@array[ 4 .. 10 ]) { s/peter/paul/ }
foreach (@hash{qw[key1 key2]}) {
s/^\s+//; # trim leading whitespace
s/\s+$//; # trim trailing whitespace
s/(\w+)/\u\L$1/g; # "titlecase" words
}
A slice of an empty list is still an empty list. Thus:
@a = ()[1,0]; # @a has no elements
@b = (@a)[0,1]; # @b has no elements
@c = (0,1)[2,3]; # @c has no elements
But:
@a = (1)[1,0]; # @a has two elements
@b = (1,undef)[1,0,2]; # @b has three elements
This makes it easy to write loops that terminate when a null list is returned:
while ( ($home, $user) = (getpwent)[7,0]) {
printf "%-8s %s\n", $user, $home;
}
As noted earlier in this document, the scalar sense of list assignment is the number of elements on the right-hand side of the assignment. The null list contains no elements, so when the password file is exhausted, the result is 0, not 2.
If you're confused about why you use an '@' there on a hash slice instead of a '%', think of it like this. The type of bracket (square or curly) governs whether it's an array or a hash being looked at. On the other hand, the leading symbol ('$' or '@') on the array or hash indicates whether you are getting back a singular value (a scalar) or a plural one (a list).
Perl uses an internal type called a typeglob to hold an entire
symbol table entry. The type prefix of a typeglob is a *, because
it represents all types. This used to be the preferred way to
pass arrays and hashes by reference into a function, but now that
we have real references, this is seldom needed.
The main use of typeglobs in modern Perl is create symbol table aliases. This assignment:
*this = *that;
makes $this an alias for $that, @this an alias for @that, %this an alias for %that, &this an alias for &that, etc. Much safer is to use a reference. This:
local *Here::blue = \$There::green;
temporarily makes $Here::blue an alias for $There::green, but doesn't make @Here::blue an alias for @There::green, or %Here::blue an alias for %There::green, etc. See Symbol Tables in the perlmod manpage for more examples of this. Strange though this may seem, this is the basis for the whole module import/export system.
Another use for typeglobs is to pass filehandles into a function or to create new filehandles. If you need to use a typeglob to save away a filehandle, do it this way:
$fh = *STDOUT;
or perhaps as a real reference, like this:
$fh = \*STDOUT;
See the perlsub manpage for examples of using these as indirect filehandles in functions.
Typeglobs are also a way to create a local filehandle using the local()
operator. These last until their block is exited, but may be passed back.
For example:
sub newopen {
my $path = shift;
local *FH; # not my!
open (FH, $path) or return undef;
return *FH;
}
$fh = newopen('/etc/passwd');
Now that we have the *foo{THING} notation, typeglobs aren't used as much
for filehandle manipulations, although they're still needed to pass brand
new file and directory handles into or out of functions. That's because
*HANDLE{IO} only works if HANDLE has already been used as a handle.
In other words, *FH must be used to create new symbol table entries;
*foo{THING} cannot. When in doubt, use *FH.
All functions that are capable of creating filehandles (open(),
opendir(), pipe(), socketpair(), sysopen(), socket(), and accept())
automatically create an anonymous filehandle if the handle passed to
them is an uninitialized scalar variable. This allows the constructs
such as open(my $fh, ...) and open(local $fh,...) to be used to
create filehandles that will conveniently be closed automatically when
the scope ends, provided there are no other references to them. This
largely eliminates the need for typeglobs when opening filehandles
that must be passed around, as in the following example:
sub myopen {
open my $fh, "@_"
or die "Can't open '@_': $!";
return $fh;
}
{
my $f = myopen("</etc/motd");
print <$f>;
# $f implicitly closed here
}
Note that if an initialized scalar variable is used instead the
result is different: my $fh='zzz'; open($fh, ...) is equivalent
to open( *{'zzz'}, ...).
use strict 'refs' forbids such practice.
Another way to create anonymous filehandles is with the Symbol module or with the IO::Handle module and its ilk. These modules have the advantage of not hiding different types of the same name during the local(). See the bottom of open() in the perlfunc manpage for an example.
See the perlvar manpage for a description of Perl's built-in variables and
a discussion of legal variable names. See the perlref manpage, the perlsub manpage,
and Symbol Tables in the perlmod manpage for more discussion on typeglobs and
the *foo{THING} syntax.