|
|
RPC::XML::Procedure - Object encapsulation of server-side RPC procedures
require RPC::XML::Procedure;
...
$method_1 = RPC::XML::Procedure->new({ name => 'system.identity',
code => sub { ... },
signature => [ 'string' ] });
$method_2 = RPC::XML::Procedure->new('/path/to/status.xpl');
This package is comprised of the code that was formerly RPC::XML::Method. The package was renamed when the decision was made to support procedures and methods as functionally different entities. It is not necessary to include both this module and RPC::XML::Method -- this module provides the latter as an empty subclass. In time, RPC::XML::Method will be removed from the distribution entirely.
The RPC::XML::Procedure package is designed primarily for behind-the-scenes
use by the RPC::XML::Server class and any subclasses of it. It is
documented here in case a project chooses to sub-class it for their purposes
(which would require setting the method_class attribute when creating
server objects, see the RPC::XML::Server manpage).
This package grew out of the increasing need to abstract the operations that related to the methods a given server instance was providing. Previously, methods were passed around simply as hash references. It was a small step then to move them into a package and allow for operations directly on the objects themselves. In the spirit of the original hashes, all the key data is kept in clear, intuitive hash keys (rather than obfuscated as the other classes do). Thus it is important to be clear on the interface here before sub-classing this package.
The following methods are provided by this class:
new(FILE|HASHREF|LIST)
Creates a new object of the class, and returns a reference to it. The arguments to the constructor are variable in nature, depending on the type:
If there is exactly on argument that is not a reference, it is assumed to be a filename from which the method is to be loaded. This is presumed to be in the XPL format descibed below (see XPL File Structure). If the file cannot be opened, or if once opened cannot be parsed, an error is raised.
If there is exactly one argument that is a reference, it is assumed to be a hash with the relevant information on the same keys as the object itself uses. This is primarily to support backwards-compatibility to code written when methods were implemented simply as hash references.
If there is more than one argument in the list, then the list is assumed to be
a sort of ``ersatz'' hash construct, in that one of the keys (signature) is
allowed to occur multiple times. Otherwise, each of the following is allowed,
but may only occur once:
The name of the method, as it will be presented to clients
A reference to a subroutine, or an anonymous subroutine, that will receive calls for the method
(May appear more than once) Provides one calling-signature for the method, as either a space-separated string of types or a list-reference
The help-text for a method, which is generally used as a part of the introspection interface for a server
The version number/string for the method
A boolean (true or false) value indicating whether the method should be hidden from introspection and similar listings
Note that all of these correspond to the values that can be changed via the accessor methods detailed later.
If any error occurs during object creation, an error message is returned in lieu of the object reference.
Create a copy of the calling object, and return the new reference. All
elements are copied over cleanly, except for the code reference stored on the
code hash key. The clone will point to the same code reference as the
original. Elements such as signature are copied, so that changes to the
clone will not impact the original.
Returns the name by which the server is advertising the method. Unlike the next few accessors, this cannot be changed on an object. In order to streamline the managment of methods within the server classes, this must persist. However, the other elements may be used in the creation of a new object, which may then be added to the server, if the name absolutely must change.
code([NEW])
Returns or sets the code-reference that will receive calls as marshalled by the server. The existing value is lost, so if it must be preserved, then it should be retrieved prior to the new value being set.
signature([NEW])
Return a list reference containing the signatures, or set it. Each element of the list is a string of space-separated types (the first of which is the return type the method produces in that calling context). If this is being used to set the signature, then an array reference must be passed that contains one or more strings of this nature. Nested list references are not allowed at this level. If the new signatures would cause a conflict (a case in which the same set of input types are specified for different output types), the old set is silently restored.
help([NEW])
Returns or sets the help-text for the method. As with code, the previous value is lost.
hidden([NEW])
Returns or sets the hidden status of the method. Setting it loses the previous value.
version([NEW])
Returns or sets the version string for the method (overwriting as with the other accessors).
Returns a true/false value as to whether the object currently has enough content to be a valid method for a server to publish. This entails having at the very least a name, one or more signatures, and a code-reference to route the calls to. A server created from the classes in this software suite will not accept a method that is not valid.
add_signature(LIST)
Add one or more signatures (which may be a list reference or a string) to the internal tables for this method. Duplicate signatures are ignored. If the new signature would cause a conflict (a case in which the same set of input types are specified for different output types), the old set is restored and an error message is returned.
delete_signature(LIST)
Deletes the signature or signatures (list reference or string) from the internal tables. Quietly ignores any signature that does not exist. If the new signature would cause a conflict (a case in which the same set of input types are specified for different output types), the old set is restored and an error message is returned.
match_signature(SIGNATURE)
Check that the passed-in signature is known to the method, and if so returns
the type that the method should be returning as a result of the call. Returns
a zero (0) otherwise. This differs from other signature operations in that the
passed-in signature (which may be a list-reference or a string) does not
include the return type. This method is provided so that servers may check a
list of arguments against type when marshalling an incoming call. For example,
a signature of 'int int' would be tested for by calling
$M->match_signature('int') and expecting the return value to be int.
Execute the code that this object encapsulates, using the list of parameters
passed in PARAMLIST. The SERVER argument should be an object derived from the
RPC::XML::Server class. For some types of procedure objects, this becomes
the first argument of the parameter list to simulate a method call as if it
were on the server object itself. The return value should be a data object
(possibly a RPC::XML::fault), but may not always be pre-encoded. Errors
trapped in $@ are converted to fault objects. This method is generally used
in the dispatch method of the server class, where the return value is
subsequently wrapped within a RPC::XML::response object.
Instruct the object to reload itself from the file it originally was loaded from, assuming that it was loaded from a file to begin with. Returns an error if the method was not originally loaded from a file, or if an error occurs during the reloading operation.
In addition to the attributes managed by the accessors documented earlier, the following hash keys are also available for use. These are also not strongly protected, and the same care should be taken before altering any of them:
When the method was loaded from a file, this key contains the path to the file used.
When the method was loaded from a file, this key contains the
modification-time of the file, as a UNIX-style time value. This is used to
check for changes to the file the code was originally read from.
When the method is being used by one of the server classes provided in this software suite, this key is incremented each time the server object dispatches a request to the method. This can later be checked to provide some indication of how frequently the method is being invoked.
This section focuses on the way in which methods are expressed in these files,
referred to here as ``XPL files'' due to the *.xpl filename extension
(which stands for ``XML Procedure Layout''). This mini-dialect, based on XML,
is meant to provide a simple means of specifying method definitions separate
from the code that comprises the application itself. Thus, methods may
theoretically be added, removed, debugged or even changed entirely without
requiring that the server application itself be rebuilt (or, possibly, without
it even being restarted).
The XPL Procedure Layout dialect is a very simple application of XML to the problem of expressing the method in such a way that it could be useful to other packages than this one, or useful in other contexts than this one.
The lightweight DTD for the layout can be summarized as:
<!ELEMENT proceduredef (name, version?, hidden?, signature+,
help?, code)>
<!ELEMENT methoddef (name, version?, hidden?, signature+,
help?, code)>
<!ELEMENT name (#PCDATA)>
<!ELEMENT version (#PCDATA)>
<!ELEMENT hidden EMPTY>
<!ELEMENT signature (#PCDATA)>
<!ELEMENT help (#PCDATA)>
<!ELEMENT code (#PCDATA)>
<!ATTLIST code language (#PCDATA)>
The containing tag is always one of <methoddef> or
<proceduredef>. The tags that specify name, signatures and the code
itself must always be present. Some optional information may also be
supplied. The ``help'' text, or what an introspection API would expect to use to
document the method, is also marked as optional. Having some degree of
documentation for all the methods a server provides is a good rule of thumb,
however.
The default methods that this package provides are turned into XPL files by the make_method tool (see make_method). The final forms of these may serve as direct examples of what the file should look like.
Some of the information in the XPL file is only for book-keeping: the version
stamp of a method is never involved in the invocation. The server also keeps
track of the last-modified time of the file the method is read from, as well
as the full directory path to that file. The <hidden /> tag is used
to identify those methods that should not be exposed to the outside world
through any sort of introspection/documentation API. They are still available
and callable, but the client must possess the interface information in order
to do so.
The name, signatures and code must be present for obvious reasons. The
<name> tag tells the server what external name this procedure is
known by. The <signature> tag, which may appear more than once,
provides the definition of the interface to the function in terms of what
types and quantity of arguments it will accept, and for a given set of
arguments what the type of the returned value is. Lastly is the
<code> tag, without which there is no procedure to remotely call.
Note that the <code> tag is the only one with an attribute, in this
case ``language''. This is designed to allow for one XPL file to provide a given
method in multiple languages. Why, one might ask, would there be a need for
this?
It is the hope behind this package that collections of RPC suites may one day
be made available as separate entities from this specific software package.
Given this hope, it is not unreasonable to suggest that such a suite of code
might be implemented in more than one language (each of Perl, Python, Ruby and
Tcl, for example). Languages which all support the means by which to take new
code and add it to a running process on demand (usually through an ``eval''
keyword or something similar). If the file A.xpl is provided with
implementations in all four of the above languages, the name, help text,
signature and even hidden status would likely be identical. So, why not share
the non-language-specific elements in the spirit of re-use?
The utility script make_method is provided as a part of this software
suite. It allows for the automatic creation of XPL files from either
command-line information or from template files. It has a wide variety of
features and options, and is out of the scope of this particular manual
page. The package Makefile.PL features an example of engineering the
automatic generation of XPL files and their delivery as a part of the normal
Perl module build process. Using this tool is highly recommended over managing
XPL files directly. For the full details, see make_method.
Unless otherwise noted in the individual documentation sections, all methods return the object reference on success, or a (non-reference) text string containing the error message upon failure.
Moving the method management to a separate class adds a good deal of overhead to the general system. The trade-off in reduced complexity and added maintainability should offset this.
This module is licensed under the terms of the Artistic License that covers Perl. See <http://www.opensource.org/licenses/artistic-license.php> for the license.
the RPC::XML::Server manpage, make_method
Randy J. Ray <rjray@blackperl.com>