|
|
| PostgreSQL 8.1.4 Documentation | ||||
|---|---|---|---|---|
| Prev | Fast Backward | Fast Forward | Next | |
psql is a terminal-based front-end to PostgreSQL. It enables you to type in queries interactively, issue them to PostgreSQL, and see the query results. Alternatively, input can be from a file. In addition, it provides a number of meta-commands and various shell-like features to facilitate writing scripts and automating a wide variety of tasks.
Print all input lines to standard output as they are read. This is more useful for script processing rather than interactive mode. This is equivalent to setting the variable ECHO to all.
Switches to unaligned output mode. (The default output mode is otherwise aligned.)
Specifies that psql is to execute one command string, command, and then exit. This is useful in shell scripts.
command must be either a command string that is completely parsable by the server (i.e., it contains no psql specific features), or a single backslash command. Thus you cannot mix SQL and psql meta-commands. To achieve that, you could pipe the string into psql, like this: echo "\x \\ select * from foo;" | psql.
If the command string contains multiple SQL commands, they are processed in a single transaction, unless there are explicit BEGIN/COMMIT commands included in the string to divide it into multiple transactions. This is different from the behavior when the same string is fed to psql's standard input.
Specifies the name of the database to connect to. This is equivalent to specifying dbname as the first non-option argument on the command line.
Copy all SQL commands sent to the server to standard output as well. This is equivalent to setting the variable ECHO to queries.
Echo the actual queries generated by \d and other backslash commands. You can use this to study psql's internal operations. This is equivalent to setting the variable ECHO_HIDDEN from within psql.
Use the file filename as the source of commands instead of reading commands interactively. After the file is processed, psql terminates. This is in many ways equivalent to the internal command \i.
If filename is - (hyphen), then standard input is read.
Using this option is subtly different from writing psql < filename. In general, both will do what you expect, but using -f enables some nice features such as error messages with line numbers. There is also a slight chance that using this option will reduce the start-up overhead. On the other hand, the variant using the shell's input redirection is (in theory) guaranteed to yield exactly the same output that you would have gotten had you entered everything by hand.
Use separator as the field separator for unaligned output. This is equivalent to \pset fieldsep or \f.
Specifies the host name of the machine on which the server is running. If the value begins with a slash, it is used as the directory for the Unix-domain socket.
Turn on HTML tabular output. This is equivalent to \pset format html or the \H command.
List all available databases, then exit. Other non-connection options are ignored. This is similar to the internal command \list.
Write all query output into file filename, in addition to the normal output destination.
Put all query output into file filename. This is equivalent to the command \o.
Specifies the TCP port or the local Unix-domain socket file extension on which the server is listening for connections. Defaults to the value of the PGPORT environment variable or, if not set, to the port specified at compile time, usually 5432.
Allows you to specify printing options in the style of \pset on the command line. Note that here you have to separate name and value with an equal sign instead of a space. Thus to set the output format to LaTeX, you could write -P format=latex.
Specifies that psql should do its work quietly. By default, it prints welcome messages and various informational output. If this option is used, none of this happens. This is useful with the -c option. Within psql you can also set the QUIET variable to achieve the same effect.
Use separator as the record separator for unaligned output. This is equivalent to the \pset recordsep command.
Run in single-step mode. That means the user is prompted before each command is sent to the server, with the option to cancel execution as well. Use this to debug scripts.
Runs in single-line mode where a newline terminates an SQL command, as a semicolon does.
Note: This mode is provided for those who insist on it, but you are not necessarily encouraged to use it. In particular, if you mix SQL and meta-commands on a line the order of execution might not always be clear to the inexperienced user.
Turn off printing of column names and result row count footers, etc. This is equivalent to the \t command.
Allows you to specify options to be placed within the
HTML table tag. See
\pset for details.
Forces psql to prompt for the user name and password before connecting to the database.
This option is deprecated, as it is conceptually flawed. (Prompting for a non-default user name and prompting for a password because the server requires it are really two different things.) You are encouraged to look at the -U and -W options instead.
Connect to the database as the user username instead of the default. (You must have permission to do so, of course.)
Perform a variable assignment, like the \set internal command. Note that you must separate name and value, if any, by an equal sign on the command line. To unset a variable, leave off the equal sign. To just set a variable without a value, use the equal sign but leave off the value. These assignments are done during a very early stage of start-up, so variables reserved for internal purposes might get overwritten later.
Print the psql version and exit.
Forces psql to prompt for a password before connecting to a database.
psql should automatically prompt for a password whenever the server requests password authentication. However, currently password request detection is not totally reliable, hence this option to force a prompt. If no password prompt is issued and the server requires password authentication, the connection attempt will fail.
This option will remain set for the entire session, even if you change the database connection with the meta-command \connect.
Turn on the expanded table formatting mode. This is equivalent to the \x command.
Do not read the start-up file (neither the system-wide psqlrc file nor the user's ~/.psqlrc file).
Show help about psql command line arguments, and exit.
psql returns 0 to the shell if it finished normally, 1 if a fatal error of its own (out of memory, file not found) occurs, 2 if the connection to the server went bad and the session was not interactive, and 3 if an error occurred in a script and the variable ON_ERROR_STOP was set.
psql is a regular PostgreSQL client application. In order to connect to a database you need to know the name of your target database, the host name and port number of the server and what user name you want to connect as. psql can be told about those parameters via command line options, namely -d, -h, -p, and -U respectively. If an argument is found that does not belong to any option it will be interpreted as the database name (or the user name, if the database name is already given). Not all these options are required; there are useful defaults. If you omit the host name, psql will connect via a Unix-domain socket to a server on the local host, or via TCP/IP to localhost on machines that don't have Unix-domain sockets. The default port number is determined at compile time. Since the database server uses the same default, you will not have to specify the port in most cases. The default user name is your Unix user name, as is the default database name. Note that you can't just connect to any database under any user name. Your database administrator should have informed you about your access rights.
When the defaults aren't quite right, you can save yourself some typing by setting the environment variables PGDATABASE, PGHOST, PGPORT and/or PGUSER to appropriate values. (For additional environment variables, see Section 28.11.) It is also convenient to have a ~/.pgpass file to avoid regularly having to type in passwords. See Section 28.12 for more information.
If the connection could not be made for any reason (e.g., insufficient privileges, server is not running on the targeted host, etc.), psql will return an error and terminate.
In normal operation, psql provides a prompt with the name of the database to which psql is currently connected, followed by the string =>. For example,
$ psql testdb
Welcome to psql 8.1.4, the PostgreSQL interactive terminal.
Type: \copyright for distribution terms
\h for help with SQL commands
\? for help with psql commands
\g or terminate with semicolon to execute query
\q to quit
testdb=>
At the prompt, the user may type in SQL commands. Ordinarily, input lines are sent to the server when a command-terminating semicolon is reached. An end of line does not terminate a command. Thus commands can be spread over several lines for clarity. If the command was sent and executed without error, the results of the command are displayed on the screen.
Whenever a command is executed, psql also polls for asynchronous notification events generated by LISTEN and NOTIFY.
Anything you enter in psql that begins with an unquoted backslash is a psql meta-command that is processed by psql itself. These commands help make psql more useful for administration or scripting. Meta-commands are more commonly called slash or backslash commands.
The format of a psql command is the backslash, followed immediately by a command verb, then any arguments. The arguments are separated from the command verb and each other by any number of whitespace characters.
To include whitespace into an argument you may quote it with a single quote. To include a single quote into such an argument, precede it by a backslash. Anything contained in single quotes is furthermore subject to C-like substitutions for \n (new line), \t (tab), \digits (octal), and \xdigits (hexadecimal).
If an unquoted argument begins with a colon (:), it is taken as a psql variable and the value of the variable is used as the argument instead.
Arguments that are enclosed in backquotes (`) are taken as a command line that is passed to the shell. The output of the command (with any trailing newline removed) is taken as the argument value. The above escape sequences also apply in backquotes.
Some commands take an SQL identifier (such as a table name) as argument. These arguments follow the syntax rules of SQL: Unquoted letters are forced to lowercase, while double quotes (") protect letters from case conversion and allow incorporation of whitespace into the identifier. Within double quotes, paired double quotes reduce to a single double quote in the resulting name. For example, FOO"BAR"BAZ is interpreted as fooBARbaz, and "A weird"" name" becomes A weird" name.
Parsing for arguments stops when another unquoted backslash occurs. This is taken as the beginning of a new meta-command. The special sequence \\ (two backslashes) marks the end of arguments and continues parsing SQL commands, if any. That way SQL and psql commands can be freely mixed on a line. But in any case, the arguments of a meta-command cannot continue beyond the end of the line.
The following meta-commands are defined:
If the current table output format is unaligned, it is switched to aligned. If it is not unaligned, it is set to unaligned. This command is kept for backwards compatibility. See \pset for a more general solution.
Changes the current working directory to directory. Without argument, changes to the current user's home directory.
Tip: To print your current working directory, use \!pwd.
Sets the title of any tables being printed as the result of a query or unset any such title. This command is equivalent to \pset title title. (The name of this command derives from "caption", as it was previously only used to set the caption in an HTML table.)
Establishes a connection to a new database and/or under a user name. The previous connection is closed. If dbname is - the current database name is assumed.
If username is omitted the current user name is assumed.
As a special rule, \connect without any arguments will connect to the default database as the default user (as you would have gotten by starting psql without any arguments).
If the connection attempt failed (wrong user name, access denied, etc.), the previous connection will be kept if and only if psql is in interactive mode. When executing a non-interactive script, processing will immediately stop with an error. This distinction was chosen as a user convenience against typos on the one hand, and a safety mechanism that scripts are not accidentally acting on the wrong database on the other hand.
Performs a frontend (client) copy. This is an operation that runs an SQL COPY command, but instead of the server reading or writing the specified file, psql reads or writes the file and routes the data between the server and the local file system. This means that file accessibility and privileges are those of the local user, not the server, and no SQL superuser privileges are required.
The syntax of the command is similar to that of the SQL COPY command. Note that, because of this, special parsing rules apply to the \copy command. In particular, the variable substitution rules and backslash escapes do not apply.
\copy table from stdin | stdout reads/writes based on the command input and output respectively. All rows are read from the same source that issued the command, continuing until \. is read or the stream reaches EOF. Output is sent to the same place as command output. To read/write from psql's standard input or output, use pstdin or pstdout. This option is useful for populating tables in-line within a SQL script file.
Tip: This operation is not as efficient as the SQL COPY command because all data must pass through the client/server connection. For large amounts of data the SQL command may be preferable.
Shows the copyright and distribution terms of PostgreSQL.
For each relation (table, view, index, or sequence) matching the pattern, show all columns, their types, the tablespace (if not the default) and any special attributes such as NOT NULL or defaults, if any. Associated indexes, constraints, rules, and triggers are also shown, as is the view definition if the relation is a view. ("Matching the pattern" is defined below.)
The command form \d+ is identical, except that more information is displayed: any comments associated with the columns of the table are shown, as is the presence of OIDs in the table.
Note: If \d is used without a pattern argument, it is equivalent to \dtvs which will show a list of all tables, views, and sequences. This is purely a convenience measure.
Lists all available aggregate functions, together with the data type they operate on. If pattern is specified, only aggregates whose names match the pattern are shown.
Lists all available tablespaces. If pattern is specified, only tablespaces whose names match the pattern are shown. If + is appended to the command name, each object is listed with its associated permissions.
Lists all available conversions between character-set encodings. If pattern is specified, only conversions whose names match the pattern are listed.
Lists all available type casts.
Shows the descriptions of objects matching the pattern, or of all visible objects if no argument is given. But in either case, only objects that have a description are listed. ("Object" covers aggregates, functions, operators, types, relations (tables, views, indexes, sequences, large objects), rules, and triggers.) For example:
=> \dd version
Object descriptions
Schema | Name | Object | Description
------------+---------+----------+---------------------------
pg_catalog | version | function | PostgreSQL version string
(1 row)
Descriptions for objects can be created with the COMMENT SQL command.
Lists all available domains. If pattern is specified, only matching domains are shown.
Lists available functions, together with their argument and return types. If pattern is specified, only functions whose names match the pattern are shown. If the form \df+ is used, additional information about each function, including language and description, is shown.
Note: To look up functions taking argument or returning values of a specific type, use your pager's search capability to scroll through the \df output.
To reduce clutter, \df does not show data type I/O functions. This is implemented by ignoring functions that accept or return type cstring.
Lists all database roles. If pattern is specified, only those roles whose names match the pattern are listed. (This command is now effectively the same as \du.)
This is not the actual command name: the letters i, s, t, v, S stand for index, sequence, table, view, and system table, respectively. You can specify any or all of these letters, in any order, to obtain a listing of all the matching objects. The letter S restricts the listing to system objects; without S, only non-system objects are shown. If + is appended to the command name, each object is listed with its associated description, if any.
If pattern is specified, only objects whose names match the pattern are listed.
This is an alias for \lo_list, which shows a list of large objects.
Lists all available schemas (namespaces). If pattern (a regular expression) is specified, only schemas whose names match the pattern are listed. Non-local temporary schemas are suppressed. If + is appended to the command name, each object is listed with its associated permissions and description, if any.
Lists available operators with their operand and return types. If pattern is specified, only operators whose names match the pattern are listed.
Produces a list of all available tables, views and sequences with their associated access privileges. If pattern is specified, only tables, views and sequences whose names match the pattern are listed.
The commands GRANT and REVOKE are used to set access privileges. See GRANT for more information.
Lists all data types or only those that match pattern. The command form \dT+ shows extra information.
Lists all database roles, or only those that match pattern.
If filename is specified, the file is edited; after the editor exits, its content is copied back to the query buffer. If no argument is given, the current query buffer is copied to a temporary file which is then edited in the same fashion.
The new query buffer is then re-parsed according to the normal rules of psql, where the whole buffer is treated as a single line. (Thus you cannot make scripts this way. Use \i for that.) This means also that if the query ends with (or rather contains) a semicolon, it is immediately executed. In other cases it will merely wait in the query buffer.
Tip: psql searches the environment variables PSQL_EDITOR, EDITOR, and VISUAL (in that order) for an editor to use. If all of them are unset, vi is used on Unix systems, notepad.exe on Windows systems.
Prints the arguments to the standard output, separated by one space and followed by a newline. This can be useful to intersperse information in the output of scripts. For example:
=> \echo `date` Tue Oct 26 21:40:57 CEST 1999
If the first argument is an unquoted -n the trailing newline is not written.
Tip: If you use the \o command to redirect your query output you may wish to use \qecho instead of this command.
Sets the client character set encoding. Without an argument, this command shows the current encoding.
Sets the field separator for unaligned query output. The default is the vertical bar (|). See also \pset for a generic way of setting output options.
Sends the current query input buffer to the server and optionally stores the query's output in filename or pipes the output into a separate Unix shell executing command. A bare \g is virtually equivalent to a semicolon. A \g with argument is a "one-shot" alternative to the \o command.
Gives syntax help on the specified SQL command. If command is not specified, then psql will list all the commands for which syntax help is available. If command is an asterisk (*), then syntax help on all SQL commands is shown.
Note: To simplify typing, commands that consists of several words do not have to be quoted. Thus it is fine to type \help alter table.
Turns on HTML query output format. If the HTML format is already on, it is switched back to the default aligned text format. This command is for compatibility and convenience, but see \pset about setting other output options.
Reads input from the file filename and executes it as though it had been typed on the keyboard.
Note: If you want to see the lines on the screen as they are read you must set the variable ECHO to all.
List the names, owners, and character set encodings of all the databases in the server. If + is appended to the command name, database descriptions are also displayed.
Reads the large object with OID loid from the database and
writes it to filename. Note that this is
subtly different from the server function
lo_export, which acts with the permissions
of the user that the database server runs as and on the server's
file system.
Tip: Use \lo_list to find out the large object's OID.
Stores the file into a PostgreSQL large object. Optionally, it associates the given comment with the object. Example:
foo=> \lo_import '/home/peter/pictures/photo.xcf' 'a picture of me' lo_import 152801
The response indicates that the large object received object ID 152801 which one ought to remember if one wants to access the object ever again. For that reason it is recommended to always associate a human-readable comment with every object. Those can then be seen with the \lo_list command.
Note that this command is subtly different from the server-side
lo_import because it acts as the local user
on the local file system, rather than the server's user and file
system.
Shows a list of all PostgreSQL large objects currently stored in the database, along with any comments provided for them.
Deletes the large object with OID loid from the database.
Tip: Use \lo_list to find out the large object's OID.
Saves future query results to the file filename or pipes future results into a separate Unix shell to execute command. If no arguments are specified, the query output will be reset to the standard output.
"Query results" includes all tables, command responses, and notices obtained from the database server, as well as output of various backslash commands that query the database (such as \d), but not error messages.
Tip: To intersperse text output in between query results, use \qecho.
Print the current query buffer to the standard output.
This command sets options affecting the output of query result tables. parameter describes which option is to be set. The semantics of value depend thereon.
Adjustable printing options are:
Sets the output format to one of unaligned, aligned, html, latex, or troff-ms. Unique abbreviations are allowed. (That would mean one letter is enough.)
"Unaligned" writes all columns of a row on a line, separated by the currently active field separator. This is intended to create output that might be intended to be read in by other programs (tab-separated, comma-separated). "Aligned" mode is the standard, human-readable, nicely formatted text output that is default. The "HTML" and "LaTeX" modes put out tables that are intended to be included in documents using the respective mark-up language. They are not complete documents! (This might not be so dramatic in HTML, but in LaTeX you must have a complete document wrapper.)
The second argument must be a number. In general, the higher the number the more borders and lines the tables will have, but this depends on the particular format. In HTML mode, this will translate directly into the border=... attribute, in the others only values 0 (no border), 1 (internal dividing lines), and 2 (table frame) make sense.
Toggles between regular and expanded format. When expanded format is enabled, query results are displayed in two columns, with the column name on the left and the data on the right. This mode is useful if the data wouldn't fit on the screen in the normal "horizontal" mode.
Expanded mode is supported by all four output formats.
The second argument is a string that should be printed whenever a column is null. The default is not to print anything, which can easily be mistaken for, say, an empty string. Thus, one might choose to write \pset null '(null)'.
Specifies the field separator to be used in unaligned output mode. That way one can create, for example, tab- or comma-separated output, which other programs might prefer. To set a tab as field separator, type \pset fieldsep '\t'. The default field separator is '|' (a vertical bar).
Toggles the display of the default footer (x rows).
Toggles the display of a locale-aware character to separate groups of digits to the left of the decimal marker. It also enables a locale-aware decimal marker.
Specifies the record (line) separator to use in unaligned output mode. The default is a newline character.
Toggles between tuples only and full display. Full display may show extra information such as column headers, titles, and various footers. In tuples only mode, only actual table data is shown.
Sets the table title for any subsequently printed tables. This can be used to give your output descriptive tags. If no argument is given, the title is unset.
Allows you to specify any attributes to be placed inside the
HTML table tag. This
could for example be cellpadding or
bgcolor. Note that you probably don't want
to specify border here, as that is already
taken care of by \pset border.
Controls use of a pager for query and psql help output. If the environment variable PAGER is set, the output is piped to the specified program. Otherwise a platform-dependent default (such as more) is used.
When the pager is off, the pager is not used. When the pager is on, the pager is used only when appropriate, i.e. the output is to a terminal and will not fit on the screen. (psql does not do a perfect job of estimating when to use the pager.) \pset pager turns the pager on and off. Pager can also be set to always, which causes the pager to be always used.
Illustrations on how these different formats look can be seen in the Examples section.
Tip: There are various shortcut commands for \pset. See \a, \C, \H, \t, \T, and \x.
Note: It is an error to call \pset without arguments. In the future this call might show the current status of all printing options.
Quits the psql program.
This command is identical to \echo except that the output will be written to the query output channel, as set by \o.
Resets (clears) the query buffer.
Print or save the command line history to filename. If filename is omitted, the history is written to the standard output. This option is only available if psql is configured to use the GNU Readline library.
Sets the internal variable name to value or, if more than one value is given, to the concatenation of all of them. If no second argument is given, the variable is just set with no value. To unset a variable, use the \unset command.
Valid variable names can contain characters, digits, and underscores. See the section Variables below for details. Variable names are case-sensitive.
Although you are welcome to set any variable to anything you want, psql treats several variables as special. They are documented in the section about variables.
Note: This command is totally separate from the SQL command SET.
Toggles the display of output column name headings and row count footer. This command is equivalent to \pset tuples_only and is provided for convenience.
Allows you to specify attributes to be placed within the
table tag in HTML tabular
output mode. This command is equivalent to \pset
tableattr table_options.
Toggles a display of how long each SQL statement takes, in milliseconds.
Outputs the current query buffer to the file filename or pipes it to the Unix command command.
Toggles expanded table formatting mode. As such it is equivalent to \pset expanded.
Produces a list of all available tables, views and sequences with their associated access privileges. If a pattern is specified, only tables,views and sequences whose names match the pattern are listed.
The commands GRANT and REVOKE are used to set access privileges. See GRANT for more information.
This is an alias for \dp ("display privileges").
Escapes to a separate Unix shell or executes the Unix command command. The arguments are not further interpreted, the shell will see them as is.
Shows help information about the backslash commands.
The various \d commands accept a pattern parameter to specify the object name(s) to be displayed. * means "any sequence of characters" and ? means "any single character". (This notation is comparable to Unix shell file name patterns.) Advanced users can also use regular-expression notations such as character classes, for example [0-9] to match "any digit". To make any of these pattern-matching characters be interpreted literally, surround it with double quotes.
A pattern that contains an (unquoted) dot is interpreted as a schema name pattern followed by an object name pattern. For example, \dt foo*.bar* displays all tables in schemas whose name starts with foo and whose table name starts with bar. If no dot appears, then the pattern matches only objects that are visible in the current schema search path.
Whenever the pattern parameter is omitted completely, the \d commands display all objects that are visible in the current schema search path. To see all objects in the database, use the pattern *.*.
psql provides variable substitution features similar to common Unix command shells. Variables are simply name/value pairs, where the value can be any string of any length. To set variables, use the psql meta-command \set:
testdb=> \set foo bar
sets the variable foo to the value bar. To retrieve the content of the variable, precede the name with a colon and use it as the argument of any slash command:
testdb=> \echo :foo bar
Note: The arguments of \set are subject to the same substitution rules as with other commands. Thus you can construct interesting references such as \set :foo 'something' and get "soft links" or "variable variables" of Perl or PHP fame, respectively. Unfortunately (or fortunately?), there is no way to do anything useful with these constructs. On the other hand, \set bar :foo is a perfectly valid way to copy a variable.
If you call \set without a second argument, the variable is set, with an empty string as value. To unset (or delete) a variable, use the command \unset.
psql's internal variable names can consist of letters, numbers, and underscores in any order and any number of them. A number of these variables are treated specially by psql. They indicate certain option settings that can be changed at run time by altering the value of the variable or represent some state of the application. Although you can use these variables for any other purpose, this is not recommended, as the program behavior might grow really strange really quickly. By convention, all specially treated variables consist of all upper-case letters (and possibly numbers and underscores). To ensure maximum compatibility in the future, avoid using such variable names for your own purposes. A list of all specially treated variables follows.
When on (the default), each SQL command is automatically committed upon successful completion. To postpone commit in this mode, you must enter a BEGIN or START TRANSACTION SQL command. When off or unset, SQL commands are not committed until you explicitly issue COMMIT or END. The autocommit-off mode works by issuing an implicit BEGIN for you, just before any command that is not already in a transaction block and is not itself a BEGIN or other transaction-control command, nor a command that cannot be executed inside a transaction block (such as VACUUM).
Note: In autocommit-off mode, you must explicitly abandon any failed transaction by entering ABORT or ROLLBACK. Also keep in mind that if you exit the session without committing, your work will be lost.
Note: The autocommit-on mode is PostgreSQL's traditional behavior, but autocommit-off is closer to the SQL spec. If you prefer autocommit-off, you may wish to set it in the system-wide psqlrc file or your ~/.psqlrc file.
The name of the database you are currently connected to. This is set every time you connect to a database (including program start-up), but can be unset.
If set to all, all lines entered from the keyboard or from a script are written to the standard output before they are parsed or executed. To select this behavior on program start-up, use the switch -a. If set to queries, psql merely prints all queries as they are sent to the server. The switch for this is -e.
When this variable is set and a backslash command queries the database, the query is first shown. This way you can study the PostgreSQL internals and provide similar functionality in your own programs. (To select this behavior on program start-up, use the switch -E.) If you set the variable to the value noexec, the queries are just shown but are not actually sent to the server and executed.
The current client character set encoding.
If this variable is set to ignorespace, lines which begin with a space are not entered into the history list. If set to a value of ignoredups, lines matching the previous history line are not entered. A value of ignoreboth combines the two options. If unset, or if set to any other value than those above, all lines read in interactive mode are saved on the history list.
Note: This feature was shamelessly plagiarized from Bash.
The file name that will be used to store the history list. The default value is ~/.psql_history. For example, putting
\set HISTFILE ~/.psql_history- :DBNAME
in ~/.psqlrc will cause psql to maintain a separate history for each database.
Note: This feature was shamelessly plagiarized from Bash.
The number of commands to store in the command history. The default value is 500.
Note: This feature was shamelessly plagiarized from Bash.
The database server host you are currently connected to. This is set every time you connect to a database (including program start-up), but can be unset.
If unset, sending an EOF character (usually Control+D) to an interactive session of psql will terminate the application. If set to a numeric value, that many EOF characters are ignored before the application terminates. If the variable is set but has no numeric value, the default is 10.
Note: This feature was shamelessly plagiarized from Bash.
The value of the last affected OID, as returned from an INSERT or lo_insert command. This variable is only guaranteed to be valid until after the result of the next SQL command has been displayed.
When on, if a statement in a transaction block generates an error, the error is ignored and the transaction continues. When interactive, such errors are only ignored in interactive sessions, and not when reading script files. When off (the default), a statement in a transaction block that generates an error aborts the entire transaction. The on_error_rollback-on mode works by issuing an implicit SAVEPOINT for you, just before each command that is in a transaction block, and rolls back to the savepoint on error.
By default, if non-interactive scripts encounter an error, such as a malformed SQL command or internal meta-command, processing continues. This has been the traditional behavior of psql but it is sometimes not desirable. If this variable is set, script processing will immediately terminate. If the script was called from another script it will terminate in the same fashion. If the outermost script was not called from an interactive psql session but rather using the -f option, psql will return error code 3, to distinguish this case from fatal error conditions (error code 1).
The database server port to which you are currently connected. This is set every time you connect to a database (including program start-up), but can be unset.
These specify what the prompts psql issues should look like. See Prompting below.
This variable is equivalent to the command line option -q. It is probably not too useful in interactive mode.
This variable is equivalent to the command line option -S.
This variable is equivalent to the command line option -s.
The database user you are currently connected as. This is set every time you connect to a database (including program start-up), but can be unset.
This variable can be set to the values default, verbose, or terse to control the verbosity of error reports.
An additional useful feature of psql variables is that you can substitute ("interpolate") them into regular SQL statements. The syntax for this is again to prepend the variable name with a colon (:).
testdb=> \set foo 'my_table' testdb=> SELECT * FROM :foo;
would then query the table my_table. The value of the variable is copied literally, so it can even contain unbalanced quotes or backslash commands. You must make sure that it makes sense where you put it. Variable interpolation will not be performed into quoted SQL entities.
A popular application of this facility is to refer to the last inserted OID in subsequent statements to build a foreign key scenario. Another possible use of this mechanism is to copy the contents of a file into a table column. First load the file into a variable and then proceed as above.
testdb=> \set content '\'' `cat my_file.txt` '\'' testdb=> INSERT INTO my_table VALUES (:content);
One possible problem with this approach is that my_file.txt might contain single quotes. These need to be escaped so that they don't cause a syntax error when the second line is processed. This could be done with the program sed:
testdb=> \set content '\'' `sed -e "s/'/\\\\\\'/g" < my_file.txt` '\''
Observe the correct number of backslashes (6)! It works this way: After psql has parsed this line, it passes sed -e "s/'/\\\'/g" < my_file.txt to the shell. The shell will do its own thing inside the double quotes and execute sed with the arguments -e and s/'/\\'/g. When sed parses this it will replace the two backslashes with a single one and then do the substitution. Perhaps at one point you thought it was great that all Unix commands use the same escape character. And this is ignoring the fact that you might have to escape all backslashes as well because SQL text constants are also subject to certain interpretations. In that case you might be better off preparing the file externally.
Since colons may legally appear in SQL commands, the following rule applies: the character sequence ":name" is not changed unless "name" is the name of a variable that is currently set. In any case you can escape a colon with a backslash to protect it from substitution. (The colon syntax for variables is standard SQL for embedded query languages, such as ECPG. The colon syntax for array slices and type casts are PostgreSQL extensions, hence the conflict.)
The prompts psql issues can be customized to your preference. The three variables PROMPT1, PROMPT2, and PROMPT3 contain strings and special escape sequences that describe the appearance of the prompt. Prompt 1 is the normal prompt that is issued when psql requests a new command. Prompt 2 is issued when more input is expected during command input because the command was not terminated with a semicolon or a quote was not closed. Prompt 3 is issued when you run an SQL COPY command and you are expected to type in the row values on the terminal.
The value of the selected prompt variable is printed literally, except where a percent sign (%) is encountered. Depending on the next character, certain other text is substituted instead. Defined substitutions are:
The full host name (with domain name) of the database server, or [local] if the connection is over a Unix domain socket, or [local:/dir/name], if the Unix domain socket is not at the compiled in default location.
The host name of the database server, truncated at the first dot, or [local] if the connection is over a Unix domain socket.
The port number at which the database server is listening.
The database session user name. (The expansion of this value might change during a database session as the result of the command SET SESSION AUTHORIZATION.)
The name of the current database.
Like %/, but the output is ~ (tilde) if the database is your default database.
If the session user is a database superuser, then a #, otherwise a >. (The expansion of this value might change during a database session as the result of the command SET SESSION AUTHORIZATION.)
In prompt 1 normally =, but ^ if in single-line mode, and ! if the session is disconnected from the database (which can happen if \connect fails). In prompt 2 the sequence is replaced by -, *, a single quote, a double quote, or a dollar sign, depending on whether psql expects more input because the command wasn't terminated yet, because you are inside a /* ... */ comment, or because you are inside a quoted or dollar-escaped string. In prompt 3 the sequence doesn't produce anything.
Transaction status: an empty string when not in a transaction block, or * when in a transaction block, or ! when in a failed transaction block, or ? when the transaction state is indeterminate (for example, because there is no connection).
The character with the indicated octal code is substituted.
The value of the psql variable name. See the section Variables for details.
The output of command, similar to ordinary "back-tick" substitution.
Prompts may contain terminal control characters which, for example, change the color, background, or style of the prompt text, or change the title of the terminal window. In order for the line editing features of Readline to work properly, these non-printing control characters must be designated as invisible by surrounding them with %[ and %]. Multiple pairs of these may occur within the prompt. For example,
testdb=> \set PROMPT1 '%[%033[1;33;40m%]%n@%/%R%[%033[0m%#%] '
results in a boldfaced (1;) yellow-on-black (33;40) prompt on VT100-compatible, color-capable terminals.
To insert a percent sign into your prompt, write %%. The default prompts are '%/%R%# ' for prompts 1 and 2, and '>> ' for prompt 3.
Note: This feature was shamelessly plagiarized from tcsh.
psql supports the Readline library for convenient line editing and retrieval. The command history is automatically saved when psql exits and is reloaded when psql starts up. Tab-completion is also supported, although the completion logic makes no claim to be an SQL parser. If for some reason you do not like the tab completion, you can turn it off by putting this in a file named .inputrc in your home directory:
$if psql set disable-completion on $endif
(This is not a psql but a Readline feature. Read its documentation for further details.)
If the query results do not fit on the screen, they are piped through this command. Typical values are more or less. The default is platform-dependent. The use of the pager can be disabled by using the \pset command.
Default connection database
Default connection parameters
Editor used by the \e command. The variables are examined in the order listed; the first that is set is used.
Command executed by the \! command.
Directory for storing temporary files. The default is /tmp.
Before starting up, psql attempts to read and execute commands from the system-wide psqlrc file and the user's ~/.psqlrc file. (On Windows, the user's startup file is named %APPDATA%\postgresql\psqlrc.conf.) See PREFIX/share/psqlrc.sample for information on setting up the system-wide file. It could be used to set up the client or the server to taste (using the \set and SET commands).
Both the system-wide psqlrc file and the user's ~/.psqlrc file can be made version-specific by appending a dash and the PostgreSQL release number, for example ~/.psqlrc-8.1.4. A matching version-specific file will be read in preference to a non-version-specific file.
The command-line history is stored in the file ~/.psql_history, or %APPDATA%\postgresql\psql_history on Windows.
In an earlier life psql allowed the first argument of a single-letter backslash command to start directly after the command, without intervening whitespace. For compatibility this is still supported to some extent, but we are not going to explain the details here as this use is discouraged. If you get strange messages, keep this in mind. For example
testdb=> \foo Field separator is "oo".
which is perhaps not what one would expect.
psql only works smoothly with servers of the same version. That does not mean other combinations will fail outright, but subtle and not-so-subtle problems might come up. Backslash commands are particularly likely to fail if the server is of a different version.
psql is built as a "console application". Since the Windows console windows use a different encoding than the rest of the system, you must take special care when using 8-bit characters within psql. If psql detects a problematic console code page, it will warn you at startup. To change the console code page, two things are necessary:
Set the code page by entering cmd.exe /c chcp 1252. (1252 is a code page that is appropriate for German; replace it with your value.) If you are using Cygwin, you can put this command in /etc/profile.
Set the console font to "Lucida Console", because the raster font does not work with the ANSI code page.
The first example shows how to spread a command over several lines of input. Notice the changing prompt:
testdb=> CREATE TABLE my_table ( testdb(> first integer not null default 0, testdb(> second text) testdb-> ; CREATE TABLE
Now look at the table definition again:
testdb=> \d my_table
Table "my_table"
Attribute | Type | Modifier
-----------+---------+--------------------
first | integer | not null default 0
second | text |
Now we change the prompt to something more interesting:
testdb=> \set PROMPT1 '%n@%m %~%R%# ' peter@localhost testdb=>
Let's assume you have filled the table with data and want to take a look at it:
peter@localhost testdb=> SELECT * FROM my_table;
first | second
-------+--------
1 | one
2 | two
3 | three
4 | four
(4 rows)
You can display tables in different ways by using the \pset command:
peter@localhost testdb=> \pset border 2
Border style is 2.
peter@localhost testdb=> SELECT * FROM my_table;
+-------+--------+
| first | second |
+-------+--------+
| 1 | one |
| 2 | two |
| 3 | three |
| 4 | four |
+-------+--------+
(4 rows)
peter@localhost testdb=> \pset border 0
Border style is 0.
peter@localhost testdb=> SELECT * FROM my_table;
first second
----- ------
1 one
2 two
3 three
4 four
(4 rows)
peter@localhost testdb=> \pset border 1
Border style is 1.
peter@localhost testdb=> \pset format unaligned
Output format is unaligned.
peter@localhost testdb=> \pset fieldsep ","
Field separator is ",".
peter@localhost testdb=> \pset tuples_only
Showing only tuples.
peter@localhost testdb=> SELECT second, first FROM my_table;
one,1
two,2
three,3
four,4Alternatively, use the short commands:
peter@localhost testdb=> \a \t \x Output format is aligned. Tuples only is off. Expanded display is on. peter@localhost testdb=> SELECT * FROM my_table; -[ RECORD 1 ]- first | 1 second | one -[ RECORD 2 ]- first | 2 second | two -[ RECORD 3 ]- first | 3 second | three -[ RECORD 4 ]- first | 4 second | four