36.6. Basic Statements

36.6.1. Assignment

An assignment of a value to a variable or row/record field is written as:

identifier := expression;

As explained above, the expression in such a statement is evaluated by means of an SQL SELECT command sent to the main database engine. The expression must yield a single value.

If the expression's result data type doesn't match the variable's data type, or the variable has a specific size/precision (like char(20)), the result value will be implicitly converted by the PL/pgSQL interpreter using the result type's output-function and the variable type's input-function. Note that this could potentially result in run-time errors generated by the input function, if the string form of the result value is not acceptable to the input function.

Examples:

user_id := 20;
tax := subtotal * 0.06;

36.6.2. SELECT INTO

The result of a SELECT command yielding multiple columns (but only one row) can be assigned to a record variable, row-type variable, or list of scalar variables. This is done by:

SELECT INTO target select_expressions FROM ...;

where target can be a record variable, a row variable, or a comma-separated list of simple variables and record/row fields. The select_expressions and the remainder of the command are the same as in regular SQL.

Note that this is quite different from PostgreSQL's normal interpretation of SELECT INTO, where the INTO target is a newly created table. If you want to create a table from a SELECT result inside a PL/pgSQL function, use the syntax CREATE TABLE ... AS SELECT.

If a row or a variable list is used as target, the selected values must exactly match the structure of the target, or a run-time error occurs. When a record variable is the target, it automatically configures itself to the row type of the query result columns.

Except for the INTO clause, the SELECT statement is the same as a normal SQL SELECT command and can use its full power.

The INTO clause can appear almost anywhere in the SELECT statement. Customarily it is written either just after SELECT as shown above, or just before FROM — that is, either just before or just after the list of select_expressions.

If the query returns zero rows, null values are assigned to the target(s). If the query returns multiple rows, the first row is assigned to the target(s) and the rest are discarded. (Note that "the first row" is not well-defined unless you've used ORDER BY.)

You can check the special FOUND variable (see Section 36.6.6) after a SELECT INTO statement to determine whether the assignment was successful, that is, at least one row was was returned by the query. For example:

SELECT INTO myrec * FROM emp WHERE empname = myname;
IF NOT FOUND THEN
    RAISE EXCEPTION 'employee % not found', myname;
END IF;

To test for whether a record/row result is null, you can use the IS NULL conditional. There is, however, no way to tell whether any additional rows might have been discarded. Here is an example that handles the case where no rows have been returned:

DECLARE
    users_rec RECORD;
BEGIN
    SELECT INTO users_rec * FROM users WHERE user_id=3;

    IF users_rec.homepage IS NULL THEN
        -- user entered no homepage, return "http://"
        RETURN 'http://';
    END IF;
END;

36.6.3. Executing an Expression or Query With No Result

Sometimes one wishes to evaluate an expression or query but discard the result (typically because one is calling a function that has useful side-effects but no useful result value). To do this in PL/pgSQL, use the PERFORM statement:

PERFORM query;

This executes query and discards the result. Write the query the same way as you would in an SQL SELECT command, but replace the initial keyword SELECT with PERFORM. PL/pgSQL variables will be substituted into the query as usual. Also, the special variable FOUND is set to true if the query produced at least one row or false if it produced no rows.

An example:

PERFORM create_mv('cs_session_page_requests_mv', my_query);

36.6.4. Doing Nothing At All

Sometimes a placeholder statement that does nothing is useful. For example, it can indicate that one arm of an if/then/else chain is deliberately empty. For this purpose, use the NULL statement:

NULL;

For example, the following two fragments of code are equivalent:

    BEGIN
        y := x / 0;
    EXCEPTION
        WHEN division_by_zero THEN
            NULL;  -- ignore the error
    END;

    BEGIN
        y := x / 0;
    EXCEPTION
        WHEN division_by_zero THEN  -- ignore the error
    END;

Which is preferable is a matter of taste.

36.6.5. Executing Dynamic Commands

Oftentimes you will want to generate dynamic commands inside your PL/pgSQL functions, that is, commands that will involve different tables or different data types each time they are executed. PL/pgSQL's normal attempts to cache plans for commands will not work in such scenarios. To handle this sort of problem, the EXECUTE statement is provided:

EXECUTE command-string [ INTO target ];

where command-string is an expression yielding a string (of type text) containing the command to be executed and target is a record variable, row variable, or a comma-separated list of simple variables and record/row fields.

Note in particular that no substitution of PL/pgSQL variables is done on the command string. The values of variables must be inserted in the command string as it is constructed.

Unlike all other commands in PL/pgSQL, a command run by an EXECUTE statement is not prepared and saved just once during the life of the session. Instead, the command is prepared each time the statement is run. The command string can be dynamically created within the function to perform actions on different tables and columns.

The INTO clause specifies where the results of a SELECT command should be assigned. If a row or variable list is provided, it must exactly match the structure of the results produced by the SELECT (when a record variable is used, it will configure itself to match the result's structure automatically). If multiple rows are returned, only the first will be assigned to the INTO variable. If no rows are returned, NULL is assigned to the INTO variable. If no INTO clause is specified, the results of a SELECT command are discarded.

SELECT INTO is not currently supported within EXECUTE.

When working with dynamic commands you will often have to handle escaping of single quotes. The recommended method for quoting fixed text in your function body is dollar quoting. (If you have legacy code that does not use dollar quoting, please refer to the overview in Section 36.2.1, which can save you some effort when translating said code to a more reasonable scheme.)

Dynamic values that are to be inserted into the constructed query require special handling since they might themselves contain quote characters. An example (this assumes that you are using dollar quoting for the function as a whole, so the quote marks need not be doubled):

EXECUTE 'UPDATE tbl SET '
        || quote_ident(colname)
        || ' = '
        || quote_literal(newvalue)
        || ' WHERE key = '
        || quote_literal(keyvalue);

This example demonstrates the use of the quote_ident and quote_literal functions. For safety, expressions containing column and table identifiers should be passed to quote_ident. Expressions containing values that should be literal strings in the constructed command should be passed to quote_literal. Both take the appropriate steps to return the input text enclosed in double or single quotes respectively, with any embedded special characters properly escaped.

Note that dollar quoting is only useful for quoting fixed text. It would be a very bad idea to try to do the above example as

EXECUTE 'UPDATE tbl SET '
        || quote_ident(colname)
        || ' = $$'
        || newvalue
        || '$$ WHERE key = '
        || quote_literal(keyvalue);

because it would break if the contents of newvalue happened to contain $$. The same objection would apply to any other dollar-quoting delimiter you might pick. So, to safely quote text that is not known in advance, you must use quote_literal.

A much larger example of a dynamic command and EXECUTE can be seen in Example 36-6, which builds and executes a CREATE FUNCTION command to define a new function.

36.6.6. Obtaining the Result Status

There are several ways to determine the effect of a command. The first method is to use the GET DIAGNOSTICS command, which has the form:

GET DIAGNOSTICS variable = item [ , ... ];

This command allows retrieval of system status indicators. Each item is a key word identifying a state value to be assigned to the specified variable (which should be of the right data type to receive it). The currently available status items are ROW_COUNT, the number of rows processed by the last SQL command sent down to the SQL engine, and RESULT_OID, the OID of the last row inserted by the most recent SQL command. Note that RESULT_OID is only useful after an INSERT command into a table containing OIDs.

An example:

GET DIAGNOSTICS integer_var = ROW_COUNT;

The second method to determine the effects of a command is to check the special variable named FOUND, which is of type boolean. FOUND starts out false within each PL/pgSQL function call. It is set by each of the following types of statements:

• A SELECT INTO statement sets FOUND true if it returns a row, false if no row is returned.

• A PERFORM statement sets FOUND true if it produces (and discards) a row, false if no row is produced.

• UPDATE, INSERT, and DELETE statements set FOUND true if at least one row is affected, false if no row is affected.

• A FETCH statement sets FOUND true if it returns a row, false if no row is returned.

• A FOR statement sets FOUND true if it iterates one or more times, else false. This applies to all three variants of the FOR statement (integer FOR loops, record-set FOR loops, and dynamic record-set FOR loops). FOUND is set this way when the FOR loop exits; inside the execution of the loop, FOUND is not modified by the FOR statement, although it may be changed by the execution of other statements within the loop body.

FOUND is a local variable within each PL/pgSQL function; any changes to it affect only the current function.